Zionpark High-security Automatic High Speed Swing-door Pedestrian Access Control System

Intelligent turnstiles are compatible with various card readers, including IC cards, ID cards, barcode cards, and fingerprint readers, providing a civilized and orderly access control system for pedestrian traffic. They effectively manage entry and exit, and are widely applicable in various settings such as train stations, ports, subways, factories, office buildings, smart residential complexes, hotels, clubs, and other enterprises and institutions that require intelligent access control. Single-motor unit: suitable for single-lane and multi-lane systems; dual-motor unit: suitable for multi-lane systems.

Enclosure Material: Domestic standard 304 stainless steel
Operating Voltage: AC 220V ±10% 50Hz ±10%
Drive Motor: DC 24V brushless motor
Infrared Configuration: 6 or more pairs of infrared sensors
Dimensions: 1400L x 120W x 980H (mm)
Swing Arm Length: 300-400mm (outside the enclosure)
Swing Arm Rotation Angle: 180 degrees
Swing Direction: One-way or two-way
Operating Environment: Indoor/Outdoor (under shelter) -10℃～70℃; Relative Humidity: ≤90%, no condensation
Gate Opening/Closing Time: 1 second
Passage Speed: 40 people/minute (always open), 25-30 people/minute (always closed)
Time to Enter Operating State After Power On: 3 seconds
Automatic Reset Time After Fault: 10 seconds
Normal Service Life: 10 million cycles
Communication Interface: Expandable RS232 interface, full serial communication protocol, controllable by host computer
Input Interface: Relay switch signal or 12V level signal or 12V pulse signal with pulse width >100ms, drive current >10mA

1. Equipped with self-diagnostic and alarm functions, facilitating user maintenance and operation.
2. The operating status of the device can be programmed via the built-in keypad on the main control board.
3. Anti-pinch and anti-impact protection: If the swing arm encounters an obstruction during its reset process, the motor automatically stops within a specified time. After a default delay, it will reset again (until fully reset), with minimal force (≤2kg).
4. Unauthorized entry and tailgating detection: The gate automatically closes when unauthorized entry is detected.
5. Anti-rush function: The swing arm automatically locks when no opening signal is received.
6. Anti-collision function: The swing arm releases when excessive force is applied during forced entry, and automatically resets after the person has exited the passage.
7. Anti-impact protection: If a person is in the infrared blind spot and is struck by the closing gate, the force is minimal and adjustable, and the gate panel rebounds and opens.
8. Adjustable swing arm synchronization (for dual swing gates).
9. Automatic reset function: After the gate opens, if no person passes through within a specified time, the system automatically cancels the pedestrian's access permission. The reset time is adjustable from 1 to 60 seconds (default 10 seconds). The gate opens automatically upon power failure (meeting fire safety requirements) and closes automatically when power is restored.
10. Infrared sensor reset function (6 pairs of infrared sensors).
11. Infrared sensor anti-pinch function (4 pairs of infrared sensors).
12. Compatible with various systems, including access control, payment systems, electronic ticketing systems, biometric systems, and electrostatic discharge testers.
13. One-way or two-way operation: Controls pedestrian entry and exit in one or both directions, with infrared sensors for entry and exit detection.
14. Remote control and management via a management computer.
15. Flashing alarm lights for quick and accurate identification of abnormal situations by on-site personnel.